I. Mock-up: Make a 1:10 sample with foam. (No color) Photo to communicate with Party A. If Party A is satisfied, enter the magnification stage. The magnification is 1: 1. Communicate with Party A's photos again, and after Party A's contentment is achieved, the plaster mold is turned over.
2. Gypsum mold turning: After the foam manuscript passes, Party A will turn the plaster mold into sections, and trim, polish and dry the mold. However, backward into the FRP rebuilding process.
Third, glass fiber reinforced plastic.
After the gypsum mold was trimmed and the overdrying stopped, it was confirmed that there were no layout errors, and the FRP countermeasures were performed.
(1) Penalty for release treatment, apply release wax 1-3 times.
(2) 196 # resin base layer coating, resin 2 layer coating.
(3) 3-4 layers of gold pot glass fiber cloth paste.
(4) Make sure that the resin is fully embedded after the resin is completely cured (4 × 8 square steel, 4 × 4 angle iron, 3 × 3 angle iron are mixed to build the steel skeleton, and 4 × 8 square steel main frame angle iron helps.)
After the steel frame is set up, the steel frame will be punished for anti-corrosion treatment, and the car will be special anti-corrosion paint.
Fourth, mold clamping
Mold clamping, after confirming that the above operations are completed, punish the part for mold clamping. And remove the mold. Remove excess material from edges. Assemble parts.
At this point, the glass fiber reinforced plastic sculpture is regarded as the foundation completion, and then it is punished later.
The post-treatment punishment includes: first polishing and wax removal, and after the assembly is completed, the wax removal and de-waxing large-scale modification polishing and disposal punishment.
The first seam pothole repair.
Sand the putty patch again.
The second putty repair, the overall repair of car-specific atomic ash.
The third sanding. After sanding, spray the car-specific primer.
The atomic gray putty was repaired and sanded again.
Primer spraying was performed for the second time. After confirming that there were no problems, spray 1K white premium car primer. Make sure that the primer is sprayed after the primer is dry and solidified, and the car-specific paint is adopted. (Color paint) After the middle-layer paint is dried, spray the car-specific varnish (glossy oil, or matt varnish to remove light) again and take a photo again, and send to Party A for confirmation, if there is no change.
Divide and ship. Have a technician on-site help with installation.
Fu Cheng followed the last process of glass fiber reinforced plastic sculpture, the post-processing punishment, and it was necessary to continue grinding, repairing, painting, and reducing the process. It was necessary to have exceptional patience and the pursuit of perfection to customize the perfect product.
The custom made glass fiber reinforced plastic sculpture is so out of stock because it is finely manufactured, with high quality and indecent appearance. Here is a small advertisement. Shenzhen Oudi Yafan Furniture Co., Ltd. hires domestic and foreign first-class professional design masters to design products for us. In good faith first, quality first.