Product structure characteristics
1. All the steel structures of the tower body have been statically checked by the Department of Mechanics of Shanghai Jiao Tong University and can withstand a magnitude 8 earthquake and a magnitude 12 typhoon. The whole tower structure is very stable, and the steel frame parts are double-treated with galvanized and anti-corrosive paint, which has good corrosion resistance. The internal components of the tower can also be configured with non-metallic and stainless steel parts according to different water quality or user requirements.
2. The motors and fans use products produced by the most influential special manufacturers in China. The motor is an outdoor motor dedicated to cooling towers, with protection class IP54 and insulation class F. All performances are in accordance with IEC standard of the International Electrotechnical Commission, and two-speed or three-speed motors can be configured according to user requirements in order to save energy in different weather conditions. The fan is a glass fiber reinforced plastic airfoil fan, which has the advantages of good aerodynamic performance, large air volume, high efficiency, low noise, reliable use and stable operation.
3. The heat dissipation filler is made of highly efficient modified PVC material. The film type has been tested by Xi'an Thermal Power Institute and Beijing Academy of Water Sciences. It has the advantages of small airflow resistance, large specific surface area, good hydrophilicity, large heat dissipation coefficient, etc., and it is not easy to block, convenient to clean, high strength, good flame retardant performance, resistant to Process characteristics such as aging.
4. The tower body and air duct are made of FRP, and the surface is covered with gel coat resin, which has the advantages of bright and smooth, corrosion resistance, and ultraviolet resistance. The gel coat is made by a foreign-owned enterprise, and the color can be selected by the user. The air duct adopts the latest speed-rotating air duct, which has the advantages of high kinetic energy recovery rate, high strength and high resistance to wind and snow.
5. It adopts the most advanced wave 160-45 type water collector in China, with a water collection efficiency of more than 99.99%, and the sheet material is PVC and FRP.
6. The ABS nozzle injection-molded using international advanced technology at one time has the advantages of low water supply pressure, uniform water distribution, no blockage, and no hollow phenomenon.